... Makino S33 Vertical Milling Machine, Die Steel,Tool : Dia 10 Flat End Mill, Part Size : 150 X 140 X 43 (Cutting Depth 17mm) ...32 min cutting time by iMachining 3D instead of 180 min!

Matrices y moldes

18. July 2012

iMachining titanium benchmark at SolidCAM customer

We cut titanium and saved the customer 54% for each part (42 min instead of 90 min).They have now to cut 200 such parts.

éxitos de iMachining en los clientes

10. July 2012

Steffen Grafe, Trentzsch & Hillig GBR: "you always have a problem finding the right feed and spin rates, and thanks to the iMachining Wizard, this is no longer a problem"

...through iMachining, we have also won customers, because they have to spend less money for a very good quality, which is of course an advantage for both sides

Citas de clientes sobre iMachining

9. July 2012

ProKASRO Mechatronics GmbH in Karlsruhe on iMachining: "we're thrilled - it's just incredible"

...the cycle times have been reduced by 70% to 80% - sometimes even reduced by 90%

Tienda de empleo

5. July 2012

Galander Medical GmbH on iMachining: "The cost savings are very big"

..a part from customer that took him 7 hours and 30 minutes to manufacture, we did it in iMachining in 2 hours and 50 minutes..iMachining software pays for itself very quickly

Médico

5. July 2012

Jürgen Kubas - State Technical school in Villingen-Schwenningen: "We use SolidWorks and SolidCAM for over 10 years"

..we can now use iMachining, which we find to be really great technology.

iMachining en la enseñanza técnica

2. July 2012

Udo Trimborn, Trimborn Maschinenbau: "We are really convinced about iMachining"

..milled the same part with a higher iMachining level, and we reduced the machining time to 4 1/2 mins , as opposed to 17 mins

Tienda de empleo

22. June 2012

iMachining at ISCAR GmbH in 63HRC - transmission element in a train - high production volume

..task to achieve much longer tool life...iMachining results: 2 min cutting time (50% saving)..12 slots milled per tool - tool like new!

Fabricantes y distribuidores de herramientas de corte

22. June 2012

iMachining event at ISCAR Germany - about 100 attendees, with 68 of them being ISCAR customers

...iMachining as usual fascinated the attendees and has exceeded all expectations!

Fabricantes y distribuidores de herramientas de corte

18. June 2012

iMachining at Die&Mold Event at Iscar, Sao Paolo

...success was great for both - after the event we showed both that the Iscar tools had low wear and the excellent results of the of mold machining.

Fabricantes y distribuidores de herramientas de corte

13. June 2012

iMachining vs Competitor CAM - 84% saving by iMachining!

..iMachining time 17 min vs Competitor CAM time of 1 hr 45 min..

Matrices y moldes

12. June 2012

iMachining 3D great results at Roop Polymers - 72% saving in Roughing vs CAM competitor!!!

....Rubber mold (automotive component)...steel EN31

Automoción

9. June 2012

Burns Machinery Inc, NV, USA - "iMachining is incredibly impressive"

...We have been running an aluminum pocketing job for 15 years. The run time has been 22 minutes. The job now runs in iMachining in 9 minutes...As impressive as the improved run times are the tool…

Maquinaria

5. June 2012

Rob Montgomery, Mechanical Products Inc, Lombard IL, USA, "time saved is incredible"

..first part cutting steel took about 5 min using iMachining, compared to the 2-3 hrs we were spending before to make the same part

Electrónica

Destacados

iMachining

Soluciones CAM

Vídeos

Historias de éxito

Suscripción

Empresa

Contacto

Historias de éxito de iMachining

Categorías

iMachining 3D cuts very fast at Galtronics! Saves 75% against Competitor CAM!

Using iMachining to cut MDF wood - 12600 RPM @ 1750 IPM!

SolidCAM + iMachining provides best solution as integrated CAM for SolidWorks

iMachining cutting Inconel: 96% saving in cutting cycle time & 4 times more in tool life

World Record in time saving with iMachining - 96% saving against Competitor CAMl!!!

iMachining 3D - 86% Savings in Roughing in Copper against Competitor CAM

iMachining 3D - 83% Savings in Roughing against Competitor CAM

iMachining titanium benchmark at SolidCAM customer

Steffen Grafe, Trentzsch & Hillig GBR: "you always have a problem finding the right feed and spin rates, and thanks to the iMachining Wizard, this is no longer a problem"

ProKASRO Mechatronics GmbH in Karlsruhe on iMachining: "we're thrilled - it's just incredible"

Galander Medical GmbH on iMachining: "The cost savings are very big"

Jürgen Kubas - State Technical school in Villingen-Schwenningen: "We use SolidWorks and SolidCAM for over 10 years"

Udo Trimborn, Trimborn Maschinenbau: "We are really convinced about iMachining"

iMachining at ISCAR GmbH in 63HRC - transmission element in a train - high production volume

iMachining event at ISCAR Germany - about 100 attendees, with 68 of them being ISCAR customers

iMachining at Die&Mold Event at Iscar, Sao Paolo

iMachining vs Competitor CAM - 84% saving by iMachining!

iMachining 3D great results at Roop Polymers - 72% saving in Roughing vs CAM competitor!!!

Burns Machinery Inc, NV, USA - "iMachining is incredibly impressive"

Rob Montgomery, Mechanical Products Inc, Lombard IL, USA, "time saved is incredible"

Destacados

iMachining

Soluciones CAM

Vídeos

Historias de éxito

Suscripción

Empresa

Contacto

Historias de éxito de iMachining

Categorías

iMachining 3D cuts very fast at Galtronics! Saves 75% against Competitor CAM!

Using iMachining to cut MDF wood - 12600 RPM @ 1750 IPM!

SolidCAM + iMachining provides best solution as integrated CAM for SolidWorks

iMachining cutting Inconel: 96% saving in cutting cycle time & 4 times more in tool life

World Record in time saving with iMachining - 96% saving against Competitor CAMl!!!

iMachining 3D - 86% Savings in Roughing in Copper against Competitor CAM

iMachining 3D - 83% Savings in Roughing against Competitor CAM

iMachining titanium benchmark at SolidCAM customer

Steffen Grafe, Trentzsch & Hillig GBR: "you always have a problem finding the right feed and spin rates, and thanks to the iMachining Wizard, this is no longer a problem"

ProKASRO Mechatronics GmbH in Karlsruhe on iMachining: "we're thrilled - it's just incredible"

Galander Medical GmbH on iMachining: "The cost savings are very big"

Jürgen Kubas - State Technical school in Villingen-Schwenningen: "We use SolidWorks and SolidCAM for over 10 years"

Udo Trimborn, Trimborn Maschinenbau: "We are really convinced about iMachining"

iMachining at ISCAR GmbH in 63HRC - transmission element in a train - high production volume

iMachining event at ISCAR Germany - about 100 attendees, with 68 of them being ISCAR customers

iMachining at Die&Mold Event at Iscar, Sao Paolo

iMachining vs Competitor CAM - 84% saving by iMachining!

iMachining 3D great results at Roop Polymers - 72% saving in Roughing vs CAM competitor!!!

Burns Machinery Inc, NV, USA - "iMachining is incredibly impressive"

Rob Montgomery, Mechanical Products Inc, Lombard IL, USA, "time saved is incredible"

Manténgase conectado. Suscríbase a nuestro boletín.