BENCHMARK SUMMARY
Trials Conducted by SolidCAM on 02nd FEB 2018
Material: Titanium
Total number of Settings: 2
Total number of Operations: 5
| Max RPM | Max XY Feed | Spindle Power | Controller | Material UTS |
|---|---|---|---|---|
| 3000 | 6 m / min | 5.5 kw | Sinumerik 802D | 1000 mpa |
Highlights of the cutting trial:
- Maximum depth of cut achieved on the machine in a single pass: 24 MM.
- Used Tools Diam 12mm, 8mm, & 4mm
- Observed Increased Tool life up to 3 times compared to regular machining
- Average spindle load recorded during full depth cutting: 15 %
Results:
Earlier Cycle Time was: 42 min
iMachining Cycle time: 14 min 16 sec
Cycle time Saving: 67.33%