...We have been running an aluminum pocketing job for 15 years. The run time has been 22 minutes. The job now runs in iMachining in 9 minutes...As impressive as the improved run times are the tool…

Maquinaria

2. July 2012

Udo Trimborn, Trimborn Maschinenbau: "We are really convinced about iMachining"

..milled the same part with a higher iMachining level, and we reduced the machining time to 4 1/2 mins , as opposed to 17 mins

Tienda de empleo

5. July 2012

Galander Medical GmbH on iMachining: "The cost savings are very big"

..a part from customer that took him 7 hours and 30 minutes to manufacture, we did it in iMachining in 2 hours and 50 minutes..iMachining software pays for itself very quickly

Médico

9. July 2012

ProKASRO Mechatronics GmbH in Karlsruhe on iMachining: "we're thrilled - it's just incredible"

...the cycle times have been reduced by 70% to 80% - sometimes even reduced by 90%

Tienda de empleo

15. November 2012

iMachining Aluminum at ITS - 77% savings!!!

..standard operation = 40 min - iMachining rough cut 8 minutes and iMachining finish cut 1 minute - total 9 min with iMachining

Maquinaria

28. January 2013

iMachining cut in Aluminum - 66% saving

...7 people saw the cut and filmed it -they all thought these results are impossible to achieve

éxitos de iMachining en los clientes

15. February 2013

SolidCAM wins against Competitor CAM at Alubin-SHL with iMachining impressive cutting results

..we used iMachining 3D for the 3D Roughing – the results impressed the customer tremendously..

Matrices y moldes

21. February 2013

iMachining saves 66% in cutting time in Aluminum..

...iMachining of Aluminum at level 8 turbo - owner said never in his 40 years of experience in CNC, did he encounter such high speeds and depth

Tienda de empleo

15. March 2013

Amazing cutting with iMachining at EPS - Big Aluminum Electronic box - 345x175 with 115 mm depth

..the big challenge in this part was the depth, and the need to work with very long tools..

Electrónica

26. March 2013

iMachining vs. Competitor in Aluminum cutting - totally superior, completely another level!

..cutting this part in 20 min with your CAM system and I’m cutting it with iMachining in 6 min.

éxitos de iMachining en los clientes

11. April 2013

SolidCAM customer A.P.A orders 2 modules of iMachining 2D and 3D, mainly for aluminum machining

..owner said: "amazing... I have no words to describe my satisfaction from iMachining - I couldn't have imagined how much time it saved us in Aluminum"

Citas de clientes sobre iMachining

29. April 2013

iMachining success - cycle time reduction by 70% against Competitor CAM in Aluminum

..prospect working with Competitor CAM and wanted to change for a CAM solution integrated in SolidWorks... impressed to see how easy it was to machine his part with iMachining in such a short time and…

éxitos de iMachining en los clientes

3. May 2013

iMachining benchmark at SolidCAM customer Meir Mechanics - saving 74% in Aluminum!

...the director did not expect that you can save so much in aluminum, especially when working on the indexial 4-axis machine.

Tienda de empleo

7. May 2013

iMachining 3D benchmark in Cadron Aviation: saving 56% in cycle time, cutting deep in Aluminum

The programmer could not believe that even though they have to fix the part with vacuum fixation, the part can be cut at such high speed.

Tienda de empleo

30. May 2013

Australian customer iMachining Success in Aluminum!

..SolidCAM user can remove 7.7KG of material that they have never cut before in 17 minutes!...simply amazing!

Tienda de empleo

25. July 2013

Huge aluminum part cut with SolidCAM, mainly with iMachining..

..aluminum part for Bloodhound SSC, which is a jet and rocket powered car designed to go at 1,000 mph and is a mix of car and aircraft technology...

Automoción

9. August 2013

Nate Stuart, 034motorsport: "Absolutely loving iMachining, or rather my operator is!"

...he's always impressed how quickly we're chewing new parts thanks to it - it cut our steel times way down, and tool life is way up.. the times are dramatically reduced..

Automoción

29. September 2013

Great win for iMachining in Aluminum - 64% saving!

..they did not believe that we can cut with the full depth of the tool and with the milling speeds generated by iMachining..

Tienda de empleo

6. November 2013

Amazing iMachining Win- Saving 78% cycle time in Aluminum!

During my visit I saw a very big potential for the customer to save time in their parts with iMachining 2D

Maquinaria

Destacados

iMachining

Soluciones CAM

Vídeos

Historias de éxito

Suscripción

Empresa

Contacto

Historias de éxito de iMachining

Categorías

iMachining at Maini Aerospace - 58% Savings in Aluminum against Competitor CAM

Burns Machinery Inc, NV, USA - "iMachining is incredibly impressive"

Udo Trimborn, Trimborn Maschinenbau: "We are really convinced about iMachining"

Galander Medical GmbH on iMachining: "The cost savings are very big"

ProKASRO Mechatronics GmbH in Karlsruhe on iMachining: "we're thrilled - it's just incredible"

iMachining Aluminum at ITS - 77% savings!!!

iMachining cut in Aluminum - 66% saving

SolidCAM wins against Competitor CAM at Alubin-SHL with iMachining impressive cutting results

iMachining saves 66% in cutting time in Aluminum..

Amazing cutting with iMachining at EPS - Big Aluminum Electronic box - 345x175 with 115 mm depth

iMachining vs. Competitor in Aluminum cutting - totally superior, completely another level!

SolidCAM customer A.P.A orders 2 modules of iMachining 2D and 3D, mainly for aluminum machining

iMachining success - cycle time reduction by 70% against Competitor CAM in Aluminum

iMachining benchmark at SolidCAM customer Meir Mechanics - saving 74% in Aluminum!

iMachining 3D benchmark in Cadron Aviation: saving 56% in cycle time, cutting deep in Aluminum

Australian customer iMachining Success in Aluminum!

Huge aluminum part cut with SolidCAM, mainly with iMachining..

Nate Stuart, 034motorsport: "Absolutely loving iMachining, or rather my operator is!"

Great win for iMachining in Aluminum - 64% saving!

Amazing iMachining Win- Saving 78% cycle time in Aluminum!

Destacados

iMachining

Soluciones CAM

Vídeos

Historias de éxito

Suscripción

Empresa

Contacto

Historias de éxito de iMachining

Categorías

iMachining at Maini Aerospace - 58% Savings in Aluminum against Competitor CAM

Burns Machinery Inc, NV, USA - "iMachining is incredibly impressive"

Udo Trimborn, Trimborn Maschinenbau: "We are really convinced about iMachining"

Galander Medical GmbH on iMachining: "The cost savings are very big"

ProKASRO Mechatronics GmbH in Karlsruhe on iMachining: "we're thrilled - it's just incredible"

iMachining Aluminum at ITS - 77% savings!!!

iMachining cut in Aluminum - 66% saving

SolidCAM wins against Competitor CAM at Alubin-SHL with iMachining impressive cutting results

iMachining saves 66% in cutting time in Aluminum..

Amazing cutting with iMachining at EPS - Big Aluminum Electronic box - 345x175 with 115 mm depth

iMachining vs. Competitor in Aluminum cutting - totally superior, completely another level!

SolidCAM customer A.P.A orders 2 modules of iMachining 2D and 3D, mainly for aluminum machining

iMachining success - cycle time reduction by 70% against Competitor CAM in Aluminum

iMachining benchmark at SolidCAM customer Meir Mechanics - saving 74% in Aluminum!

iMachining 3D benchmark in Cadron Aviation: saving 56% in cycle time, cutting deep in Aluminum

Australian customer iMachining Success in Aluminum!

Huge aluminum part cut with SolidCAM, mainly with iMachining..

Nate Stuart, 034motorsport: "Absolutely loving iMachining, or rather my operator is!"

Great win for iMachining in Aluminum - 64% saving!

Amazing iMachining Win- Saving 78% cycle time in Aluminum!

Manténgase conectado. Suscríbase a nuestro boletín.